Setting digital and analog audio output, Output selection) 69, Initial settings for dvd player – Pioneer Super Tuner III DVH-P7050 User Manual

Page 69

Initial Settings for
DVD player

Setting digital and analog audio
output (OUTPUT SELECTION)

You can set linear PCM audio output for both
digital and analog output. Set audio output
correctly to match the components you are
using with this unit.

Precaution

• If the setting is incorrect there will be no

sound so be sure to read the manuals of the
connected components.

1 Move the joystick up/down to select

OUTPUT SELECTION

in the second

SET UP

MENU

OUTPUT SELECTION

is indicated in blue.

2 Click the joystick.
Audio output setting menu is displayed.

3 Move the joystick up/down to select the
desired audio output setting.
The currently set audio output setting is indi-
cated the mark “ ”. The audio output setting
selected with the joystick is indicated in blue.

Output setting

Setting detail

48kHz

Select this setting when using
digital connections. A 48 kHz
signal is output regardless of
the audio sampling frequency.
A 96 kHz signal is converted to
a 48 kHz signal. (Initial setting)

96kHz

Select this setting when using
analog connections.
The signal is output with the
same frequency as the audio
sampling frequency. With a 96
kHz signal, you can enjoy
exceptionally high sound qual-
ity.

4 Click the joystick.
The selected audio output setting is set.

Notes

• With discs featuring 96 kHz recording, if you

select the

96kHz

setting, audio is not output

from digital output.

• With discs do not feature a CSS (Content

Scrambling System) copy guard signal, a 96
kHz digital signal is output.

• When using this unit with a Pioneer Multi-

channel processor (DEQ-P7050), select

48kHz

setting. If you select the

96kHz

setting, no

sound will be output when playing discs fea-
turing 96 kHz recordings.

• Pressing

RETURN

takes you back to the previ-

ous display.

English

Español

Deutsch

rançais

Italiano

Nederlands

Section