Pioneer Super Tuner III DVH-P7050 - Manual (Page 23)

Playing DVDs on the
built-in player
En 23
Basic operation of DVD
1 Press OPEN on the head unit to open the
front panel.
Disc loading slot appears.
• After inserting a DVD, press
SOURCE to
select the built-in player.
• Pressing
SOURCE on the head unit also per-
forms the same operation.
2 Insert a DVD into the Disc loading slot.
When you set
AUTO PLAY :ON , playback will
automatically start. If you set AUTO PLAY :OFF ,
press SOURCE to select DVD (refer to page 17).
Disc loading slot
EJECT button
• You can eject a DVD by pressing EJECT on the
head unit.
• To avoid a malfunction, make sure that no
metal object comes into contact with the front
panel is open.
3 After a DVD has been inserted, close the
front panel.
4 Use the joystick to select the desired
MENU option.
When the DVD offers a menu, a menu is dis-
played.
5 Click the joystick.
Playback starts from the selected menu option.
• You can display the menu by pressing the
MENU or TOP MENU while a disc is playing.
Pressing either of these buttons again lets you
start playback from the location selected from
the menu. For details, refer to the instructions
provided with the disc.
• The way to display the menu differs depend-
ing on the disc.
6 Use VOLUME to adjust the sound level.
Press VOLUME to increase or decrease the vol-
ume level.
• Rotating
VOLUME on the head unit also
increases or decreases the volume.
7 To skip back or forward to another chapter,
press
4 or ¢.
Chapter numbers are displayed for 8 seconds.
• Pressing
2 or 3 on the head unit also per-
forms the same operation.
• If the remote control is set to DVH mode,
4 and ¢ do not operate. In this case,
press
1 or ¡ to skip to another chapter.
• Using NUMBER buttons also performs the
same operation. For more details, refer to
Specifying chapter on page 24.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
04
Section