FujiFilm FinePix E900 - Manual (Page 8)

14 15
Getting
Ready
1
TURNING ON AND OFF
Move to Photography mode or Playback mode
Press the “w” button during shooting to change to
Playback mode.
Press the “w ” button again to return to
Photography mode.
Shooting b a Playback
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
Turn the camera on in Playback mode
Power-ON
● ! Press the shutter button or turn the Mode dial to return to
Photography mode.
Press the “POWER” button to turn the camera on.
Press the “POWER” button again to turn the
camera off.
The lens moves when the camera is in
Photography mode. Take care not to obstruct the
lens. Obstructing the lens will cause damage.
When this occurs, [FOCUS ERROR] or [ZOOM
ERROR] appears. Take care also not to get
fingerprints on the camera lens as this will result in
impaired image quality in your shots.
Turn the camera on in Photography mode
SETTING THE DATE AND TIME
DATE/TIME NOT SET DATE/TIME NOT SET
SET SET NO NO
1 When using the camera for the first time after
purchasing, the date and time are cleared.
Press the “MENU/OK” button to set the date and
time.
● ! The message also appears when the batteries have been
removed and the camera has been left for a long period.
● ! To set the date and time later, press the “DISP/BACK” button.
● ! If you do not set the date and time, this message will appear
each time you turn the camera on.
DATE/TIME DATE/TIME
YY.MM.DD YY.MM.DD
2007
2006
2005
2004
2003
1 1 2 1 00
A M
SET SET CANCEL CANCEL
2 1 Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2 Press “a” or “b” to correct the setting.
0 1 0 2
● ! Holding down “a” or “b” changes the numbers continuously.
● ! When the time displayed passes “12”, the AM/PM setting
changes.
3 Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
● ! At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been installed for about
2 hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed.
DATE/TIME DATE/TIME
YY.MM YY.MM.DD DD 2005 9 . . 24 10
58
59
00
01
02
AM
SET SET CANCEL CANCEL
✽ Correcting the date and time (➡P.16)