FujiFilm FinePix E900 - Manual (Page 12)

22 23
Using
the
Camera
2
SELF-TIMER SELF-TIMER
SET SET
1
2
AUTO AUTO
OFF OFF
OFF OFF
:
:
:
: 1
2
AUTO AUTO
OFF OFF : :
:
:
:
OFF OFF
SET SET
OFF OFF
1
2
AUTO AUTO
OFF OFF :
:
:
:
10 SEC 10 SEC
SET SET
OFF OFF
E R A S E O K ? E R A S E O K ?
Y E S Y E S C A N C E L C A N C E L
Y E S Y E S C A N C E L C A N C E L
: :
STD STD : STD STD : STD STD :
g button
a / Erase button
Zoom button (Playback) button
Using the Menus
Photography: Press “ T ” to zoom in (telephoto).
Press “ W ” to zoom out (wide-angle).
Playback: Press “ T ” to enlarge the image.
Press “ W ” to revert to normal display.
1Displaying the menu.
Press the “MENU/OK” button.
5Confirming the setting.
Press the “MENU/OK” button.
2Selecting a menu option.
Press the up or down arrow
on the 4-direction button.
3Selecting an option.
Press the right arrow on the
4-direction button.
Photography: d button Turns Macro
( ) on and off.
c button Sets the Flash
( ).
Playback: Change frame or movie frame
advance.
Press the “ ” button for about 1
second to turn the camera on in
Playback mode.
Instructions for the next step in the procedure
appear at the bottom of the LCD monitor. Press
the button indicated.
In the right side LCD monitor, press the
“MENU/OK” button to erase the displayed frame.
To cancel erasing, press the “DISP/BACK” button.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
◆
Displaying the on-screen Help
◆
DISP/BACK button
DISP: Press this button to select the
LCD monitor display.
BACK: Press this button to stop a
procedure midway through.
Photo mode button
Photography: Select the
quality mode, sensitivity and
FinePix COLOR settings.
Playback: Specify the print
order (DPOF) settings.
Pressing the “a” button
erases a frame (file).
4Selecting a setting.
Press the up or down arrow
on the 4-direction button.
BASIC OPERATION GUIDE
3 Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
● ! Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
● ! There may be some uneven brightness at the lower edge of
the LCD monitor. This is normal and does not affect the
photographed image.
2 Press the Flash pop-up button to pop up the flash.
● ! When the flash pops up, the image may disappear and go
dark briefly due to flash charging. The viewfinder lamp blinks
orange during charging.
● ! If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
to fix the problem.
1 Press the “POWER” button to turn the camera
on.
2 Set the Mode dial to “B”.
h Focal range
Approx. 60 cm (2.0 ft.) to infinity
● ! Use Macro mode for subjects closer than 60 cm (2.0 ft.)
(
➡P.44).
● ! When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
FULL] or [NO CARD] appears, see P.122.
4
● ! Check that the lens is clean. If it is dirty, clean the lens as
informed on P.119.
Hold the camera so that your fingers or the strap do
not cover the lens and flash. If the lens or flash is
obscured, subjects may be out of focus or the
brightness (exposure) of your shot may be
incorrect.
1
0 1 0 2
TAKING PICTURES (AUTO MODE) PHOTOGRAPHY MODE
5 Press “T” (telephoto) button to zoom in. Press “W”
(wide-angle) button to zoom out. A zoom bar
appears on the LCD monitor.
h Optical zoom focal length
(35 mm camera equivalent)
Approx. 32 mm to 128 mm
(„: Approx. 33 mm to 132 mm)
Max. zoom scale: 4
×
● ! See P.95 for information on procedures for using Digital
zoom.
6 N A
Zoom bar
Continued