FujiFilm FinePix E900 - Manual (Page 27)

52 53
Advanced
Features
3
QUALITY QUALITY
N AUTO AUTO
STD
STD
F N
:
:
:
1 Press “a” or “b” to select “˘” QUALITY.
2 Press “c”. 2
0 1 0 2
1 1 Set the Mode dial to Photography mode.
2 Press the “p” button to display the menu on the
LCD monitor.
● ! “ ˘ ” Quality cannot be selected when setting CCD-RAW
( ➡P.95).
The quality setting is retained even when the
camera is off or the mode setting is changed.
0 1 0 2
:
:
:
AUTO AUTO
3488x2616 : : 6 FRAMES FRAMES
N
N
F
STD STD
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
● ! The numbers to the right of setting show the number of
available frames.
● ! When changing the quality setting, the number of available
frames also changes (
➡P.26).
3
0 1 0 2
˘ QUALITY MODE (NUMBER OF RECORDED PIXELS)
p PHOTO MODE PHOTOGRAPHY
◆ Area shot and quality setting ◆
Normal shooting provides an
aspect ratio of 4:3 and “
„ ”
shooting provides an aspect ratio
of 3:2 (same aspect ratio as 35 mm
film and post card).
Area shot with “ „”
66 N N 66
Area shot excluding “ „”
„ (3696 × 2464)
Printing at up to 4R (10.2 × 15.2 cm) / A6 size 2 (1600 × 1200)
To use for e-mail or web site ` (640 × 480)
Printing at up to 6R (15.2 × 20.3 cm) / A5 size 3 (2048 × 1536)
Quality mode
⁄ N (3488 × 2616) Printing at up to 10R (25.4 × 30.5 cm) / A3 size
For better quality, select “ ⁄ F”
⁄ F (3488 × 2616)
Printing at up to 10R (25.4 × 30.5 cm) / A4 size ч (2592 Ч 1944)
Sample uses
Quality settings in Photography mode
Choose from 7 settings. Using the table below as a guide, select the setting that best suits your
aims.