FujiFilm FinePix S3Pro - Manual (Page 41)

80 81
Advanced
Photography
3
DYNAMIC RANGE / COLOR / TONE / SHARPNESS
PHOTOGRAPHY FUNCTION MENU
COLOR
Use the procedure below to set the density of the color used when images are shot.
h Factory default setting: STD
h If you want to view or print the image data directly, do not select “ORG”.
h If you want to change this setting, select “WIDE” as the “D-RANGE” (Dynamic range) setting in SET-UP.
ISO200
09 / 23 / 2004
10 : 00 AM
Press the “FUNC”
button to switch
between functions.
Color Tone
Sharpness Dynamic range
h If you want to view or print the image data directly, do not select “ORG”.
TONE
Use the procedure below to set the contrast when images are shot.
h Factory default setting: STD
h If you want to view or print the image data directly, do not select “OFF”.
SHARPNESS
Use this setting to soften or sharpen the outlines in an image and to adjust the quality of the
photographed image.
h Factory default setting: STD
DYNAMIC RANGE
Sets the dynamic range used for photographed images.
h Factory default setting: AUTO
Display Name Description
AUTO
The camera automatically varies the dynamic range between 100% and 400% according
to the scene being shot before taking the picture. This mode suppresses white flaring and
black patches in scenes with high contrast while also enabling you to achieve good levels
of contrast in pictures taken indoors or in cloudy weather where a wide dynamic range is
not needed.
WIDE 1 Takes the picture with the dynamic range set to 230% regardless of the scene being shot.
WIDE 2 Takes the picture with the dynamic range set to 400% regardless of the scene being shot.
Display Name Description
STD
(STANDARD)
This setting sets the contrast for photographed images to the standard level.
HARD This setting provides a higher level of contrast than the “STD” setting.
ORG
(ORIGINAL)
This setting specifies a lower contrast than the “STD” setting.
Use this setting for images that will undergo image processing for use in commercial
printing.
Display Name Description
STD
(STANDARD)
This setting applies the optimum level of sharpness for normal shots.
HARD
This setting sharpens the outlines in an image and is best for images of subjects such as
buildings or text where clarity is important.
OFF
Sharpness processing is not applied in this setting. Use this setting for images that will
undergo image processing for use in commercial printing.
Display Name Description
STD
(STANDARD)
This setting sets the standard color density.
HIGH This setting provides a higher color density than the “STD” setting.
ORG
(ORIGINAL)
This setting specifies a lower color density than the “STD” setting. Use this setting for
images that will undergo image processing for use in commercial printing.
B/W This setting converts the colors in the photographed image to black and white.
◆
The dynamic range, color, tone and sharpness cannot be changed
◆
Selecting “F1” or “F2” as the film simulation setting ( ➡P.79) prevents
these settings from being changed. Select “STD” as the film
simulation setting. FILM SIMULATION F1
FILM SIMULATION F2