Panasonic Laser Fax UF-6000 - Manual (Page 171)

171
Chapter 6 Handling Communication Reservation Files
Resending an Incomplete Document
With the Function Parameter “31 Incomplete File Save” (Fax/Email Settings > Fax Parameters) set to
“Valid”, documents that could not be transmitted due to a communication error (such as the remote
station busy or not responding) can be stored in memory as incomplete files.
This section explains how to resend incomplete files stored in memory.
z The standard setting of “31 Incomplete File Save” is set to “Invalid”. For instructions on how to modify the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
z If the Function Parameter “31 Incomplete File Save” (Fax/Email Settings > Fax Parameters) is set to “Valid”,
all incomplete files remain in the memory each time a communication error occurs. To avoid memory overflow,
retry to send the incomplete file from time to time.
1
Press the Fax key.
2
Select “More Menus”.
3
Select “Edit File Mode”.
4
Select “Retry Incomp. File”.
5
Select or to find the incomplete
file that you want to resend.
z To send all incomplete files, select “Select
All”.
6
Select the incomplete file that you
want to resend, and then select “OK”.
The communication error file is resent.
z To cancel the resend, select “Cancel”.