Basic fax transmission, Fax transmission procedure, Chapter 2 basic fax transmission – Panasonic Laser Fax UF-6000 User Manual
Page 14

14
Chapter 2 Basic Fax Transmission
Chapter 2
Basic Fax Transmission
Fax Transmission Procedure
The basic procedure of transmitting a fax on this machine is as follows.
1
Place original(s).
z
Refer to Placing Originals (Facsimile/
Internet Fax) in the Operating Instructions
(For Basic Operations) of provided booklet.
z
If the available memory is not sufficient,
Memory transmission may not be possible.
If this happens, use Direct transmission
instead. Refer to Direct Transmission (see
page 44).
2
Press the Fax key to open the Fax
screen.
Select “Basic Menu” if additional
settings are required.
z
Setting Original Quality (See page 30)
z
Setting the Original Size (See page 34)
z
Transmitting 2-Sided Originals (See page
36)
z
Job Build and SADF (See page 42)
z
Verification Stamp (See page 38)
z
Transmitting a Document Stored in
Memory (See page 40)
z
Direct Transmission (See page 44)
z
Verifying Communication Status (See
page 46)
Face up. Up to 100 sheets
(80 g/m
2
/ A4)
Face down. Align with the top
left corner. Close ADF.
Used memory