Philips DSR 300/00 - Manual (Page 28)

28 MENU
7.5.2 Reminder
When you set a reminder for a particular programme, the
receiver sends a warning at the start of that programme and
switches automatically to the right channel if you accept the
reminder message.
Select the Reminder item from the Timer sub-menu to
access the Reminder screen.
To activate a reminder:
- Set the values of the reminder parameters using the arrow
keys or numerical keys as appropriate.
- Press to confirm.
Note: an existing reminder can be disabled by selecting Disable as
Timer Type in the Reminder screen.When a timer is already active
(recording in progress), press then <0> to cancel this timer.
7.5.3 Sleep timer
You can set a sleep timer to automatically switch your
receiver to Standby mode after a given time lapse.
Select the Sleep item from the Timer sub-menu to access
the Sleep screen.
To activate a sleep timer:
- Enter the time lapse after which the receiver should go to
Standby using the numerical keys of the remote control.
- Press to confirm.
To disable a sleep timer:
- Select Disable instead of a time lapse.
- Press to confirm.
7.6 Setup menu
The Setup menu is used to modify the basic settings of your
receiver, including the clock time and general settings, such
as Video and Audio output.
7.6.1 Time Setting
This feature is used to set the local time offset with respect
to actual local time normally obtained from the network.
- Select the Time Setting item from the System sub-menu to
access the Time Setting screen.
- Select the appropriate offset value (from -12 to +12).To
help you set the offset value, the names of capital cities for
English
Doc_DSR300.qxd 29/11/04 13:19 Page 28