Philips DSR 300/00 - Manual (Page 24)

24 MENU
7.3.1 Channel Pool
Select Channel POOL and press to access the
Channel Pool screen.
In this screen, you can:
o delete channels from the channel list,
o move channels to a different position in the list,
o lock channels,
o sort channels.
7.3.1.1 To delete channels from the Channel Pool
The Delete feature is used to permanently delete a channel.
- Press the colour key of the remote control to
enable the feature. Select the channel you want to delete
by highlighting it and pressing . A marker appears in
place of the channel number.
- Press again to cancel the selection. Deletion only
takes place when you exit the screen.You are then
prompted to confirm the changes that should be taken
into account.
Note: the deleted channel cannot be recovered unless you do a
channel scan again.
7.3.1.2 To move channels in the Channel Pool
The Move feature is used to change the position of a
channel in the list.
- Press the colour key of the remote control to
enable the feature.
- Select the channel you want to move by pressing .
Press again to cancel selection.
- Then highlight the line to which you want to move the
selected channel and press .The selected channel
moves to the desired location and the channel number
changes accordingly.You are prompted to confirm the
changes when you exit the screen.
7.3.1.3 To lock channels
The Lock feature is used to lock channels.
- Press the colour key of the remote control to
enable the feature.
- Enter your 4-digit Pin Code.
English
Doc_DSR300.qxd 29/11/04 13:19 Page 24