Philips DSR 300/00 - Manual (Page 20)

6.6.2 Audio Control
- To access audio settings, select the Setup menu from the
main menu, then select System Setting.The System Setting
screen appears.
- Select Audio Output. Default Audio Output setting is Stereo.
- Select the desired value (Left, Right, Mono, or Stereo) and
press to save your changes and exit the screen.
6.6.3 Audio language
To select your preferred audio language:
- Select System Setting from the main menu.The System
Setting screen appears.
- Scroll to Audio Language, and then select the desired
language.
- Press to save your changes and exit the screen.
Note: if you want to change the audio language for a particular
programme, press on the remote control to directly access
the audio language options available for this programme.
Available languages depend on the audio content transmitted.
6.6.4 Subtitles language
To select your preferred Subtitles language:
- Select System Setting from the main menu.The System
Setting screen appears.
- Scroll to Subtitle Language, and then select the desired
language.
- Press to save your changes and exit the screen.
Note: if you want to change the Subtitle language for a particular
programme, press <
> on the remote control to directly access
the Subtitles language options available for this programme.
Available languages depend on the content transmitted.
6.7 Recording timers
Recording timers are used for VCR or DVD recordings.
6.7.1 To set a timer from the guide
- Select Guide from the main menu to access the Electronic
Programme Guide.
- Move to the desired programme using the arrow keys.
20 GENERAL VIEWING FUNCTION
English
Doc_DSR300.qxd 29/11/04 13:19 Page 20