Pioneer SUPER TUNER AVIC-Z110BT - Manual (Page 88)

3 Touch [Bluetooth Settings].
The
“Bluetooth Settings” screen appears.
Editing the device name
You can change the device name to be dis-
played on your cellular phone. (Default is
[
PIONEER NAVI].)
1 Display the
“Bluetooth Settings”
screen.
2 Touch [Device Name].
The keyboard to enter the name appears.
3 Touch to delete the current name,
and enter the new name by using the key-
board.
4 Touch [OK].
The name is changed.
p Up to 16 characters can be entered for a de-
vice name.
Editing the password
You can change the password to be used for
authentication on your cellular phone. (De-
fault is [
1111].)
p Four to eight characters can be entered for
a password.
1 Display the “Bluetooth Settings”
screen.
2 Touch [Password].
The
“Set Password” screen appears.
3 Touch any key to enter the password
you want to set and then touch [OK].
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting [
Off].
1 Display the
“Bluetooth Settings”
screen.
2 Touch [Bluetooth On/Off].
Touching [ Bluetooth On/Off] switching be-
tween [ On] and [Off].
Echo canceling and noise reduction
When you are operating hands-free phoning
in the vehicle, you may hear an undesirable
echo. This function reduces the echo and
noise while you are using hands-free phoning,
and maintains a certain sound quality.
1 Display the
“Bluetooth Settings”
screen.
2 Touch [Echo Cancel].
Touching [ Echo Cancel] switches between
[ On] and [Off].
Answering a call automatically
The navigation system automatically answers
incoming calls to the cellular phone, so you
can answer a call while driving without taking
your hands off the steering wheel.
1 Display the
“Bluetooth Settings”
screen.
2 Touch [Auto Answer Preference].
The
“Auto Answer Preference” screen ap-
pears.
Using hands-free phoning
En
88
Chapter
12