Pioneer SUPER TUNER AVIC-Z110BT - Manual (Page 175)

Restoring the default setting
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
1 Display the
“System Settings” screen.
= For details, refer to Displaying the “System
Settings
” screen on page 96.
2 Touch [Restore Factory Settings].
The message confirming whether to restore
the settings appears.
3 Touch [Yes].
Returning the navigation
system to the initial state
You can return settings or recorded content to
the default or factory settings.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
1 Park your vehicle in a safe place, and
turn off the engine. Turn the ignition key
back to
“Acc off”. Then start the engine
again, and turn the power to the naviga-
tion system back on.
The splash screen appears.
2 Press and hold the MODE button and
the TRK (c) button while splash screen ap-
pears.
The
“Select Items to Reset” screen appears.
3 Touch [Clear user information].
The message confirming whether to erase all
user data appears.
And then touch [
Yes] to erase all user data.
# Touch [Reset].
Various settings registered to the navigation sys-
tem is reset to the default or factory settings.
4 Touch [Yes].
The recorded contents are cleared.
Returning the navigation
system to the default or
factory settings
You can return settings or recorded content to
the default or factory settings. There are four
methods to clear user data, and the situations
and the cleared content are different for each
method. For information regarding the content
that is cleared by each method, see the list
presented later.
Method 1: The battery of the vehicle is
removed or the yellow lead of the
navigation system is disconnected.
Clears almost all settings of the AV function.
Method 2: Touch [Restore Factory
Settings].
This clears some items in the
“Navi Settings”
menu, the
“System Settings” menu and the
“Bluetooth Settings” menu.
= For details, refer to Setting items to be de-
leted on the next page.
Method 3: Touch [Clear user information]
on the
“Select Items to Reset” screen.
Clears almost all settings and user data of the
navigation function and the phone function.
= For details, refer to Setting items to be de-
leted on the next page.
Method 4: Touch [Reset] on the
“Select
Items to Reset
” screen.
Clears almost all settings and user data of the
navigation function and the phone function.
= For details, refer to Setting items to be de-
leted on the next page.
Other functions
En
175
Chapter
34
Other
functions