Panasonic KX-FC241AL - Manual (Page 81)

9. Programmable Features
79
9.6.1 Call Options
Setting dialling mode (tone/pulse)
For Australian users only
“
Tone” (default): Select when you have a touch
tone service.
“
Pulse”: Select when you have rotary or pulse
service.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Dial Mode”, then press ,.
6. Select the desired setting, then press ,.
7. Press {ih}.
Note:
L You can also program this feature with the
base unit (feature #13 on page 66).
Changing the recall length
Change the recall length of the cordless
handset, if necessary, depending on the
requirements of your service provider or PBX.
N For Australian users
“ Type 1”: 700 msec
“ Type 2”: 100 msec (default)
“ Type 3”: 200 msec
N For New Zealand users
“ Type 1”: 100 msec
“ Type 2”: 600 msec (default)
“ Type 3”: 200 msec
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Recall”, then press ,.
6. Select the desired setting, then press ,.
7. Press {ih}.
Setting pause length
Change the pause length of the cordless
handset, if necessary, depending on the
requirements of your service provider or PBX.
“
Short” (default): 3 sec.
“ Long”: 5 sec.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Pause Time”, then press ,.
6. Select the desired setting, then press ,.
7. Press {ih}.
Storing/changing emergency numbers
These settings determine which telephone
numbers can be dialled while the call bar feature
is ON (feature #28 on page 68, or page 76).
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Emergency Call”, then press
, .
6. Select a memory location, then press ,.
L If the memory location already contains
an emergency number, the number is
displayed.
7. Enter/edit the number, up to 24 digits, then
press ,.
8. Press {ih}.
Setting call restriction
You can restrict selected cordless
handsets/base unit from dialling certain
numbers. You can assign up to 6 telephone
numbers to be restricted, and select which
cordless handsets/base unit will be restricted.
Storing area codes here will prevent the
restricted cordless handsets/base unit from
dialling any telephone number in that area code.
If a restricted number is dialled, the call will not
be connected.
1. Press $ (centre of joystick).
2. Select u, then press ,.
3. Enter “ 0000” (default base unit PIN).
L If you changed the PIN, enter it (page 80).
4. Select “ Call Option”, then press ,.
5. Select “ Call Restricted”, then press
, .
6. Select the cordless handsets/base unit to be
restricted, then press ?.
L Restricted cordless handsets/base unit
have a Q next to them.
L To turn call restriction OFF for a cordless
handset/base unit, select it, then press
?
.
7. Press ,.
FC243AL-PFQX2096ZA-en.book Page 79 Thursday, September 30, 2004 3:37 PM