Panasonic KX-FC241AL - Manual (Page 28)

3. Preparation
26
Initial Programming
3.7 Date and time
The date and time can be set using either the
cordless handset or the base unit.
L The other party’s fax machine will print the
date and time on each page you send
according to your unit’s date and time setting.
L The accuracy of the clock is approximately
±60 seconds a month.
3.7.1 With the cordless handset
Important:
L Confirm that the power cord of the base
unit is connected.
L Ensure that w is not flashing.
1 Press $ (centre of joystick).
2 Use the joystick to select t “ Setting
Handset”.
3 Press ,.
4 Push the joystick up or down repeatedly to
select “
Set Date/Time”.
5 Press ,.
L The cursor ( | ) will appear on the display.
6 Enter the current date/month/year by
selecting 2 digits for each.
Example: 10 August, 2004
Press {1}{0} {0}{8} {0}{4}.
7 Enter the current hour/minute by selecting 2
digits for each. Press / repeatedly to
select “
AM”, “PM”, or 24-hour time entry.
L When neither “ AM” nor “PM” are
displayed, 24-hour time entry is selected.
Example: 3:15 PM (12-hour time entry)
1. Press {0}{3} {1}{5}.
2. Press / repeatedly to display “ PM”.
8 Press ,.
9 Press {ih}.
To correct a mistake
L Use the joystick to move the cursor to the
incorrect number, and make the correction.
$ /,
/
{ih}
Set Date/Time
Date :01-01-04
Time :12:00 AM
Set Date/Time
Date :10-08-04
Time :12:00 AM
Set Date/Time
Date :10-08-04
Time :03:15 AM
Set Date/Time
Date :10-08-04
Time :03:15 PM
FC243AL-PFQX2096ZA-en.book Page 26 Thursday, September 30, 2004 3:37 PM