Panasonic KX-FC241AL - Manual (Page 14)

1. Introduction
12
Finding the Controls
1.3 Button descriptions of
the base unit
L Keep the front cover page open for button
locations.
A
{ CALLER ID}
L To use Caller ID features (page 39, 41).
B
{ LOCATOR/INTERCOM}
L To page or locate a cordless handset
(page 82).
C
{ GREETING}
L To record a greeting message (page 57).
D
{ ERASE}
L To erase messages (page 57, 58).
E
{ PLAYBACK}
L To play messages (page 58).
F
{ AUTO ANSWER}
L To turn the auto answer setting ON/OFF
(page 47).
G
{ MIC} (Microphone)
L The built-in microphone.
H
{ COPY}
L To copy a document (page 55).
I
{ FAX/START}{SET}
L To start sending or receiving a fax.
L To store a setting during programming.
J
{ STOP}
L To stop an operation or programming
session.
L To erase a character/number (page 29).
Press and hold to erase all
characters/numbers.
K
{ HELP}
L To print helpful information for quick
reference (page 24).
L
{ NAVIGATOR}{VOLUME}
L To adjust volume (page 25).
L To search for a stored item (page 37, 45).
L To select features or feature settings
during programming (page 65).
L To navigate to the next operation.
M
{ MENU}
L To initiate or exit programming.
N
{ DIGITAL SP-PHONE}
L For speakerphone operation (page 32).
O
{ RECALL}
L To access special telephone services or
for transferring extension calls.
P
{ REDIAL}{PAUSE}
L To redial the last number dialled from the
base unit.
For New Zealand users only
If the line is busy when you make a phone
call using the {DIGITAL SP-PHONE}
button, the unit will automatically redial
the number up to 2 times.
L To insert a pause during dialling.
Q
{ MUTE}
L To mute your voice to the other party
during a conversation. Press again to
resume the conversation.
FC243AL-PFQX2096ZA-en.book Page 12 Thursday, September 30, 2004 3:37 PM