Panasonic KX-FC241AL - Manual (Page 24)

3. Preparation
22
3 Preparation Connections and Set up
3.1 Connections
Important:
L The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
3.1.1 Base unit
Caution:
L When you operate this product, the power
outlet should be near the product and
easily accessible.
L Be sure to use the telephone line cord
included in this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
L If you use the unit with a computer and your
internet provider instructs you to install a filter
(
3), please connect the telephone line cord
as follows.
3.1.2 Charger unit
Caution:
L If the cordless handset is not charged,
you cannot make or answer calls.
L USE ONLY WITH the included Panasonic
AC adaptor.
L The AC adaptor must remain connected at
all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
1 Power cord
L Connect to the power outlet (220 V – 240
V, 50/60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack.
This model is designed to be used in Australia
and New Zealand. TO USE IN NEW
ZEALAND, CHANGE THE LOCATION
SETTING (feature #74 on page 69).
1
2
(For Australian
users)
(For New
Zealand users)
1 AC adaptor
L Connect to the power outlet (220 V – 240
V, 50/60 Hz).
2 Hooks
L Fasten the AC adaptor cord to prevent it
from being disconnected.
3
2
1
FC243AL-PFQX2096ZA-en.book Page 22 Thursday, September 30, 2004 3:37 PM