Lexmark 280 - Manual (Page 149)

Restoring Held Job(s) x/y
• Wait for the message to clear.
• Press the down arrow button until Quit restoring appears, and then press to delete unrestored held
jobs.
Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored.
Serial
The printer is using a serial cable connection. The serial port is the active communication link.
Some held jobs were not restored
Press the down arrow button until Continue appears, and then press to delete the specified job.
Some held jobs will not be restored
• Press the down arrow button until Continue appears, and then press to clear the message and resume
printing.
• Cancel the current job.
Standard Bin Full
Remove the stack of paper from the standard exit bin to clear the message.
Submitting Selection
Wait for the message to clear.
Tray Empty
Load paper in the tray to clear the message.
Tray Low
Load paper in the specified tray to clear the message.
Tray Missing
Insert the specified tray into the printer.
USB/USB
The printer is using a USB cable connection. The USB port is the active communication link.
Understanding printer messages
149