Lexmark 280 - Manual (Page 145)

Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Enter PIN to lock
Enter the PIN you created to lock the control panel and prevent menu changes.
Flushing buffer
Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.
Insert Tray
Insert the specified tray into the printer.
Internal System Error, Reload Bookmarks
1 Press the down arrow button until Continue appears, and then press to clear the message and continue
printing.
2 Reload the bookmarks.
Internal System Error, Reload Security Certificates
• Reload the security certificates.
• Press the down arrow button until Continue appears, and then press to clear the message and continue
printing.
Invalid Engine Code
You need to download valid engine code for the printer.
For more information, visit the Lexmark Web site at www.lexmark.com, or contact customer support.
Note: Engine code may be downloaded while this message appears on the display.
Understanding printer messages
145