LST BCnet216: 19" User Manual

Description

BC216E_DBL_LST_EN_0804.PDF • PAGE 1

Building Safety. Building Security.

• Control panel modules in slide-in

technology, with/without power unit

• Centralized installation of up to 7

sectional control panels in a 19“ rack

• Flexibly expanable control panel

network for mid-sized/large systems

• Analogue ringbus technology with

unshielded detector cabling

• Addressable conventional technology
• EN 54/VdS-certiﬁ ed

Fire is a permanent threat to life and property. There-

fore, immediate response to a ﬁ re is imperative. The

main objective of the ﬁ re detection control panel Series

BC216 is to alarm and to react in time and, conse-

quently, save lives and protect property. For decades

LST have focused their aims to undertaking unrivaled

efforts in order to realize new innovations in the security

area. Research, development and production are loca-

ted within LST premises, thus guaranteeing ﬂ exible and

reliable individual solutions.

Using a 32-bit multiprocessor system, the ﬁ re detection

control panel Series BC216 ensures topmost efﬁ ciency

and speed – prerequisites for saving lives and minimi-

zing damage to property.

Description

The BCnet216 in 19“ slide-in technology is modularly

designed sectional control panel for mid-sized to very

large ﬁ re detection control panels and consists of indivi-

dual ﬁ re detection control panel modules. Each 19“ rack

RACK216-1E provides 7 slide-in positions. A maximum

of two ﬁ re detection control panel modules with power

unit BCM216-3EPS and up to six ﬁ re detection control

panel modules BCM216-3E or BCM216-3ELG, respec-

tively, can be installed in a rack (if two BCM216-3EPS

are used, the number of ﬁ re detection control panel mo-

dules BCM216-3E or BCM216-3ELG, respectively, that

can be used is reduced to a maximum of four).

The control panel can easily be adapted to any required

system size and provides literally unlimited possibilities

also for future extensions.

All BCnet sectional control panels are connected with

each other via a redundant high-security network (the

Global Security System network GSSnet). Due to the

decentralized structure, the failure safety of the entire

system is signiﬁ cantly improved compared to conventi-

onally designed ﬁ re detection control panels.

The ﬁ re detection control panel modules BCM216 -3EPS

and BCM216-3E each provide two slots for the connec-

tion of function modules (Conventional Detector Inter-

face GIF8-1 or Loop Interface LIF64-1) to which a total

of 16 detector lines in addressable conventional tech-

nology or a total of two ADM loops or a combination of

the both can be connected.

The Fire Detection Control Panel Module BCM216-3ELG

includes two integrated loop interfaces for the connec-

tion of two ADM loops.

The maximum expansion of a 19“ RACK216-1E with 7

slide-ins therefore amounts to 14 ADM loops or 112

conventional detector lines.

Easy parameterisation by means of PC software en-

ables you to optimally adapt the control panel to your

individual requirements.