Lexmark 4059-XXX User Manual
Page 96

2-69
4059 Service Manual
4059-XXX
The elevator moves in one direction only.
FRU
Action
1
Stepper Motor
High Capacity Feeder
Option Control Board
Check the voltages at J1 on the high
capacity system board. The voltage
measures as follows:
static (motor connected)
J1-1 (Orange) +24 V dc
J1-2 (Yellow) +24 V dc
J1-3 (Green) +24 V dc
J1-4 (White) +24 V dc
motor running
J1-1 (Orange) approximately +12 V dc
J1-2 (Yellow) approximately +12 V dc
J1-3 (Green) approximately +12 V d
J1-4 (White) approximately +12 V dc
If any of the voltages are incorrect,
disconnect the motor and measure the
resistance between pin J1-1 to J1-3 and J1-
2 and J1-4. The resistance measures
between 10 and 15 ohms. If incorrect,
replace the motor. If correct, replace the
high capacity feeder control board.
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)