Lexmark 4059-XXX User Manual
Page 30

2-3
4059 Service Manual
4059-XXX
910 DC Pick
Motor DC Pick
Motor Stall
Error Codes 910,911,912,913 and 914 are indications
that a Tray 1 paper feed problem has been detected. Go
to the
“Input Tray(s) Option Service Check” on
911 DC Pick
Motor Excessive
PWM
912 DC pick
motor below
speed
913 DC pick
motor over speed
914 DC pick
motor: No
encoder feedback
917 Transfer Roll
Indicates a problem in the transfer roll area. Go to the
“Transfer Roll Service Check” on page 2-105
.
920 Fuser Error
Indicates that the fuser is below temperature when
printing. Go to the
921 Fuser Error
Indicates that the fuser is below standby temperature
when the printer is idle. Go to the
922 Fuser Error
Fuser failed to reach standby temperature. Go to the
“Cold Fuser Service Check” on page 2-48
923 Fuser Error
Fuser is too hot during printing or when printer is idle. Go
to the
“Hot Fuser Service Check” on page 2-50
924 Fuser Error
An open circuit has been detected in the Fuser
Thermistor Circuit. Go to the
925 Fuser Error
Wrong fuser lamp installed. Check the fuser lamp for the
correct type of lamp that should be installed.
927 Fan Stalled
Indicates a printer fan stalled. Go to the
928 Erase Lamps
Indicates that the engine has detected that either the
erase lamp assembly is missing or disconnected. Go to
the
“Erase Lamp Service Check” on page 2-46
.
Error Code
Action