beautypg.com

Ratings, Knight boiler i=b=r rating, Other specifications – Lochinvar KBII-I-O REV C 81 - 286 User Manual

Page 7: Installation & operation manual

background image

7

Ratings

Notes:

1.

As an Energy Star Partner, Lochinvar has determined that
Knight boilers meet the Energy Star guidelines for energy
efficiency.

2.

The ratings are based on standard test procedures
prescribed by the United States Department of Energy.

3.

Net I=B=R ratings are based on net installed radiation of
sufficient quantity for the requirements of the building and
nothing need be added for normal piping and pickup.
Ratings are based on a piping and pickup allowance of 1.15.

4.

Knight boilers require special gas venting. Use only the vent
materials and methods specified in the Knight Installation
and Operation Manual.

5.

Standard Knight boilers are equipped to operate from sea
level to 4,500 feet only with no adjustments. The boiler will
de-rate by 4% for each 1,000 feet above sea level up to
4,500 feet.

6.

High altitude Knight boilers are equipped to operate from
3,000 to 12,000 feet only with no field adjustments. The
boiler will de-rate by 2% for each 1,000 feet above 3,000
feet. High altitude models are manufactured with a
different control module for altitude operation, but the
operation given in this manual remains the same as the
standard boilers. A high altitude label (as shown in FIG. A)
is also affixed to the unit.

7.

Ratings have been confirmed by the Hydronics Institute,
Section of AHRI.

Maximum allowed working pressure is located on the rating plate.

NOTICE

Knight Boiler

I=B=R Rating

Model Number

Note: Change “N” to

“L” for L.P. gas models.

Input
MBH

(Note 5)

Min Max

Gross

Output

MBH

(Note 2,7)

Net

I=B=R

Ratings

Water,

MBH

(Note 3,7)

KBN081

16

80

72

63

KBN106

21

105

94

82

KBN151

30

150

135

117

KBN211

42

210

190

165

KBN286

57

285

260

226

Other Specifications

Boiler

Water

Content

Gallons

Water

Connections

Gas

Connections

Air

Size

Vent

Size

(Note 4)

0.6

1"

1/2"

3"

3"

0.7

1"

1/2"

3"

3"

1.3

1"

1/2"

3"

3"

1.7

1"

1/2"

3"

3"

2.4

1-1/4"

3/4"

4"

4"

Figure A High Altitude Label Location

3,000 FT. TO 12,000 FT.

HIGH ALTITUDE

UNIT EQUIPPED FOR

8.

Knight boilers comply with the requirements of CSD-1
Section CW-400 requirements as a temperature operation
control. The manual reset high limit provided with the
Knight is listed to UL353.

Installation & Operation Manual