Linksys BUSINESS SPA922 - Manual (Page 161)

Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
154
Regional Tab
SPA9x2 Phone Field Reference
Daylight Saving Time Rule Enter the rule for calculating daylight saving time; it should
include the start, end, and save values. This rule is comprised
of three fields. Each field is separated by ; (a semicolon) as
shown below. Optional values inside [ ] (the brackets) are
assumed to be 0 if they are not specified. Midnight is
represented by 0:0:0 of the given date.
This is the format of the rule: Start = ; end=time>; save = .
The and values specify the start and
end dates and times of daylight saving time. Each value is in
this format: / / [/HH:[mm[:ss]]]
The value is the number of hours, minutes, and/
or seconds to add to the current time during daylight saving
time. The value can be preceded by a negative (-)
sign if subtraction is desired instead of addition. The time> value is in this format: [/[+|-]HH:[mm[:ss]]]
The value equals any value in the range 1-12
(January-December).
The value equals [+|-] any value in the range 1-31.
If is 1, it means the on or before the end of
the month (in other words the last occurrence of < weekday>
in that month).
The value equals any value in the range 1-7
(Monday-Sunday). It can also equal 0. If the value
is 0, this means that the date to start or end daylight saving is
exactly the date given. In that case, the value must not
be negative. If the value is not 0 and the
value is positive, then daylight saving starts or ends on the
value on or after the date given. If the
value is not 0 and the value is negative, then daylight
saving starts or ends on the value on or before the
date given.
The abbreviation HH stands for hours (0-23).
The abbreviation mm stands for minutes (0-59).
The abbreviation ss stands for seconds (0-59).
The default Daylight Saving Time Rule is start=4/1/7;end=10/-
1/7;save=1.
Daylight Savings Time Enable
DTMF Playback Level Local DTMF playback level in dBm, up to one decimal
place.
Defaults to -16.
DTMF Playback Length Local DTMF playback duration in milliseconds.
Defaults to .1.
Parameter Description