Internet connection type and static ip settings, Pppoe settings, Internet connection type – Linksys BUSINESS SPA922 User Manual
Page 135: Cisco confidential--first draft, Spa9x2 phone field reference
Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
128
System Tab
SPA9x2 Phone Field Reference
Internet Connection Type and Static IP Settings
PPPoE Settings
Enable Web Admin Access
Lets you enable or disable local access to the web UIweb
UI. Select yes or no from the drop-down menu.
Defaults to yes.
Admin Passwd
Password for the administrator.
Defaults to no password.
User Password
Password for the user.
Defaults to no password.
Parameter
Description
DHCP
Enable or disable DHCP.
Defaults to DHCP.
Static IP
IP address. Blank of DHCP assigned address is used.
Netmask
Network mask. Blank if DHCP assigned.
Gateway
Default router IP address. Blank if DHCP assigned.
Parameter
Description
PPPoE Login Name
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Login Password
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Service Name
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Parameter
Description