Linksys BUSINESS SPA922 - Manual (Page 148)

Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
141
Provisioning Tab
SPA9x2 Phone Field Reference
Provisioning Tab
For information about the Provisioning page, see the Linksys SPA Provisioning Guide.
Regional Tab
This section describes the fields for the following headings on the Regional tab:
• Call Progress Tones, page -141
• Distinctive Ring Patterns, page -144
• Control Timer Values (sec), page -145
• Vertical Service Activation Codes, page -145
• Vertical Service Activation Codes, page -145
• Outbound Call Codec Selection Codes, page -151
• Miscellaneous, page -153
Call Progress Tones
Multicast Address The multicast address is used by the SPA9000 to
communicate with the Linksys IP IP phones.
Defaults to 224.168.168.168:6061.
Force LAN Codec The choices are: none, G.711u, or G.711a. Defaults to
none.
Parameter Description
Dial Tone Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Parameter Description