LSI U80ALVD - Manual (Page 47)

Starting the SCSI BIOS Configuration Utility 3-5
Figure 3.2 Change Status on Next Boot Menu
To change an adapter's status, select it and press Enter. Then press the
Escape (Esc) key to exit from this menu.
3.2.1.2 Adapter Boot Order
Adapter Boot Order allows the user to set the order in which host
adapters will boot when you have more than one LSI Logic host adapter
in your system. When this option is selected, the Boot Order menu
appears.
Figure 3.3 is an example of the Boot Order menu:
Figure 3.3 Boot Order Menu
To change an adapter's boot order, select it and press Enter. You are
then prompted to enter the new boot sequence number. To remove an
adapter's boot order, press Enter again rather than entering a new
sequence number. While the maximum capacity is 32 adapters, only 0
through 3 can be assigned a boot order. If an invalid number is entered,
an error message appears. When the adapters are ordered as desired,
press the Escape (Esc) key to exit from this menu.
Main Menu
Change Status on Next Boot:
Port
Num Irq---------Status--------NVRAM
Level Current Next-Boot Found
LSI53C895A
LSI53C896
LSI53C896 FC00
F800
F801 9
9
9 On
On
On On
Off
Off Yes
Yes
Yes
Main Menu
BootSeq Bus DevFunc BootSeq Bus DevFunc
0 LSI53C895A 00 A0 1 LSI53C896 00 98
2 LSI53C896 00 90