LSI U80ALVD - Manual (Page 22)

2-4 Installing the LSIU80ALVD
2.2.2 Inserting the Host Adapter
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing this host adapter board.
Remove the LSIU80ALVD from the packing and check that it is
not damaged. An example of this host adapter board is shown
in
Figure 2.1 .
Step 2. Switch off and unplug power cords for all components in your
system.
Step 3. Remove the cabinet cover from your computer to access the
PCI slots.
Caution: Ground yourself by touching a metal surface before
removing the cabinet top. Static charges on your body can
damage electronic components. Handle plug-in boards by
the edge; do not touch board components or gold
connector contacts. The use of a static ground strap is
recommended.
Step 4. Locate the slots for PCI plug-in board installation. Refer to the
user’s manual for your computer to confirm the location of the
PCI slots. The LSIU80ALVD requires a PCI slot that allows bus
master operation.
Step 5. Remove the blank bracket panel on the back of the computer
aligned with the PCI slot you intend to use. Save the bracket
screw.