beautypg.com

2 starting the scsi bios configuration utility, Starting the scsi bios configuration utility, Device default settings – LSI U80ALVD User Manual

Page 44: Table 3.2

background image

3-2

Configuring the LSIU80ALVD

3.2

Starting the SCSI BIOS Configuration Utility

If you have LSI Logic SCSI BIOS Version 4.XX, and it includes the
LSI Logic SCSI BIOS Configuration Utility, you can change the default
configuration of the SCSI host adapters. You may decide to alter these
default values if there is a conflict between device settings or if you need
to optimize system performance.

You can see the version number of your LSI Logic SCSI BIOS in a
banner displayed on your computer monitor during boot. If the utility is
available, the following message also appears on your monitor:

Press Ctrl-C to start LSI Logic Configuration Utility...

This message remains on your screen for about five seconds, giving you
time to start the utility. If you decide to press “Ctrl-C,” the message
changes to:

Please wait, invoking LSI Logic Configuration Utility...

After a brief pause, your computer monitor displays the Main Menu of the
LSI Logic SCSI BIOS Configuration Utility.

Table 3.2

Device Default Settings

Settings for Individual SCSI Devices

Default Settings

Synchronous Transfer Rate (Mbytes/s)

80

Data Width

16

Disconnect

On

Read Write I/O Time-out (seconds)

10

Scan for Devices at Boot Time

Yes

Scan for SCSI LUNs

1

1. Logical Unit Number.

Yes

Queue Tags

On