LSI U80ALVD - Manual (Page 23)

Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the LSIU80ALVD
Step 6. Carefully insert edge connector J1 (see Figure 2.1 ) of the host
adapter into the PCI slot. Make sure the edge connector is
properly aligned before pressing the board into place as shown
in
Figure 2.2 .
Note: You may notice that the components on the PCI host
adapter face the opposite way from non-PCI adapter
boards you have in your system. This is correct, and the
board is keyed to go in only one way.
LED
Internal
External
LSIU80ALVD
SCSI
Interface
J2
Connector
J4
SCSI
Interface
J3
J1 to PCI Mainboard