3 completing the installation, Completing the installation – LSI U80ALVD User Manual
Page 42
2-24
Installing the LSIU80ALVD
2.3
Completing the Installation
Before replacing the cover on your computer, review this installation
procedure check list. This can save you effort later.
Step 1.
Replace the cabinet cover on your computer.
Step 2.
Plug in all power cords, and switch on power to all devices and
your computer.
Step 3.
Wait for your computer to boot up.
Step 4.
To change the configuration of the host adapter, see
Finally, refer to the PCI Storage
Device Management System SDMS 4.0 User’s Guide (or the
guide for the software you plan to use) to load the driver
software for your particular operating system.
Verify Installation Procedures
Done
Host adapter connection in PCI bus slot secure
Internal SCSI bus connections secure (pin-1 continuity)
External SCSI bus connections secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device