LSI U80ALVD - Manual (Page 46)

3-4 Configuring the LSIU80ALVD
Figure 3.1 Main Menu
Below the list of host adapters on the Main Menu display, you see eight
options. They are described in detail below. If these settings are altered,
the system reboots upon exit from the Configuration Utility by using the
Quit option.
3.2.1.1 Change Adapter Status
Change Adapter Status allows the user to activate or deactivate a host
adapter and all SCSI devices attached to it. When this option is used to
make a change, the change takes place after a reboot upon exit from the
utility.
Figure 3.2 is an example of the Change Status on Next Boot
menu:
Main Menu
Port
Num Irq---------Status--------NVRAM
Level Current Next-Boot Found
LSI53C895A
LSI53C896
LSI53C896 FC00
F800
F801 9
9
9 On
On
On On
Off
Off Yes
Yes
Yes
Change Adapter Status
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose
Mono/Color
Language
Help
Quit