Lexmark 3400 Series - Manual (Page 53)

2 Press down on the cartridge lever to raise the cartridge lid.
3 Insert the cartridge.
4 Close the lid.
5 Lift the scanner unit, press the scanner support back until it slides into the slot, and close the scanner unit.
1
2
3
CAUTION: When closing the scanner unit, make sure to keep your hands out from underneath the scanner unit.
6 Load paper, and press to print an alignment page.
7 Load the printed alignment page on the scanner glass.
For more information, see “Loading original documents on the scanner glass” on page 30.
8 Press again to align the cartridge.
Alignment Complete appears on the display.
If any other message appears, see “Error messages” on page 71.
Note: The scanner unit must be closed to start a new scan, print, copy, or fax job.
53