Lifescan SureStep Blood Glucose Monitor - Manual (Page 36)

TESTING
(Example)
Make sure a test strip is not in the meter
when you turn it on.
Next, the code number appears.
7. Compare the code number on the meter
display with the code number on the test
strip bottle. If they do
not match, press the
green
C button until
the codes match.
These two symbols will
alternate on the display. The meter is
now ready to perform a test. The meter
will turn off automatically after 2 minutes
if a test strip is not inserted.
Apply blood to Insert test strip
test strip into meter
26
DCO_05074503A_OT_SS_OB_US 6/19/03 11:59 AM Page 26