Linksys EtherFast FENSK05 v2 User Manual
Page 31
10/100 Network In a Box
57
Linksys EtherFast
®
Series
56
Starting Over in Windows 2000
1. Click the Start button, choose Settings, choose Control Panel, then dou-
ble-click the System icon.The System Properties window will open.
2. Choose the Hardware tab.
3. Click the Device Manager button. The Device Manager window will
open.
4. Click the plus sign (+) beside Network Adapters. The LNE100TX Fast
Ethernet Adapter listing should appear.
6. When you are done removing all the unnecessary components, click OK.
When asked to restart, click No.
7. Return to the Windows Control Panel. Double-click on the System Icon.
The System Properties window will appear. Click on the Device Manager
Tab.
8. Scroll down to the Network Adapters item and expand it by clicking on
the open [+] sign.
11. Remove all devices with the name Linksys in it’s description. (If at any
point you are asked to restart the computer, Click No).
12. Scroll down to the Other Devices section. Remove PCI Ethernet
Controller or PCI Ethernet Adapter. (If Other Devices is not listed, pro-
ceed to the next step.)
13. When you’re finished, click on the Close button, shut down Windows, and
restart your computer.
14. After your computer has restarted, turn to page 9 for Windows 98 or page
18 for Windows 95 and follow the setup instructions.