Linksys EtherFast FENSK05 v2 User Manual

Page 30

10/100 Network In a Box

Linksys EtherFast

Series

4. Remove any instance of the name Linksys in the box. This includes

IPX/SPX…Linksys, NetBEUI…Linksys, and TCP/IP…Linksys. Also
remove Client for Microsoft Networks, Client for NetWare Networks, and
File and Printer Sharing for Microsoft Networks.

In some cases, removing one of these components may in turn automati-
cally remove other components as well. If this happens, skip ahead to step
6.

5. For PCs with Dial-Up Networking and/or an AOL adapter, remove any

instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all
Clients, and File and Printer Sharing for Microsoft Networks. Do not
remove Dial-Up Adapter, AOL Adapter, TCP/IP-Compatible Protocol-
AOL Adapter or TCP/IP-Compatible Protocol-Dial-Up Adapter.

Starting Over in Windows 95, 98 or 2000

If you experience installation difficulties, you may need to re-install all of the
Windows networking components from scratch. The instructions below
explain how to give your PC a clean sweep so that you can start the EtherFast
Card’s software installation over.

The following instructions are for Windows 95 and 98. To start over in
Windows 2000, go to page 57.

Starting Over in Windows 95 & 98

1. At the desktop click on the Start Button, highlight Settings, click on

Control Panel.

2. Double-click on the Network Icon.

3. If the Configuration box has a component called Dial-Up Adapter, skip

forward to step 5. If it doesn’t, continue with step 4.

otte

e:: The screen shot

above, and the ones
on the next three
pages, are examples
only. They may differ
from system to sys-
tem.