Step 3: print your transparencies, Printing your document in reverse order, Step 1: load the paper – Lexmark Z700 User Manual

Page 41

Text mode
Original mode

Printing your document in reverse order

Step 3: Print your transparencies

Click Print.

Note: To prevent smudging, remove each transparency as it exits the printer, and then let

it dry before stacking. You can also set extra time between pages as they exit the
printer. For help, see the entry “Wait for pages to dry” on page 11. Transparencies
may require up to 15 minutes to dry.

Printing your document in reverse order

Step 1: Load the paper

•

Load the paper vertically against the right side of the paper support.

•

Make sure the print side is facing you.

•

Do not force the paper into the printer.

•

Squeeze and slide the paper guide to the left edge of the paper.

Note: If you are using Letter size paper, adjusting the paper guide may not be necessary.