Fusing process – Lexmark 5021-0XX User Manual
Page 72

1-46
Service Manual
5021-0XX
Fusing process
1. When the paper reaches the fuser, the toner image is
transferred on the paper, but not yet fused to the paper.
2. The transported paper passes between the heated roller and
the back-up roller. The heated roller’s temperature is
approximately 338°F (170°C).
3. When the paper with toner image passes between the heated
roller and the backup roller, the heat from the heated roller in
combination with the pressure between the two rollers, melts
the toner, fusing it to the paper.
4. The fused paper then separates from the rollers and is
transported out of the printer into the output bin or is routed
back into the printer for printing on the other side of the duplex
print.
See also other documents in the category Lexmark Printers:
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)