Lexmark E234 - Manual (Page 79)

Understanding the printer configuration menus
79
Network menu
Use the Network menu to change printer settings on jobs sent through a network port (either
Standard Network or Network Opt ).
Setting Use this setting to: Values
NPA Mode Send print jobs to the printer and query
printer status information
simultaneously. • Off
• Auto*
MAC Binary PS Configure the printer to process
Macintosh binary PostScript print jobs. • Off—The printer filters PostScript print jobs
using standard protocol.
• On—The printer processes raw binary
PostScript print jobs from computers using
the Macintosh operating system. This setting
often causes Windows print jobs to fail.
• Auto*—The printer processes print jobs
from computers using either Windows or
Macintosh operating systems.
Set Card Speed Automatically detect the connection
speed of your network. You can disable
this setting to set the speed manually. • Auto*—The printer detects current network
speed.
• 10Mbps
†
, Half Duplex—Forces the printer
to try to connect to the network only at
10Mbps, Half Duplex.
• 10Mbps, Full Duplex—Forces the printer to
try to connect to the network only at 10Mbps,
Full Duplex.
• 100Mbps, Half Duplex—Forces the printer
to try to connect to the network only at
100Mbps, Half Duplex.
• 100Mbps, Full Duplex—Forces the printer
to try to connect to the network only at
100Mbps, Full Duplex.
* Factory default
† Megabits per second