Linksys PCMPC100 v3 - Manual (Page 27)

EtherFast ® 10/100 PC Cards
1. Click the Start button, choose Settings, choose Control Panel, then dou-
ble-click the System icon.The System Properties window will open.
2. Choose the Hardware tab.
3. Click the Device Manager
button. The Device Manager
window will open.
4. Click the plus sign (+) beside
Network Adapters. The
Linksys EtherFast 10/100 PC
Card listing should appear.
5. Right-click on Linksys
EtherFast 10/100 PC Card. A
menu box should open.
Choose Disable.
7. When asked if you want to
Disable the device, click Yes.
Starting Over in Windows 2000
Instant EtherFast ® Series
7. Return to the Windows Control Panel. Double-click on the System Icon.
The System Properties window will appear. Click on the Device Manager
Tab.
8. Scroll down to the Network Adapters item and expand it by clicking on
the open [+] sign.
9. Remove all devices with the name Linksys in it’s description. (If at any
point you are asked to restart the computer, Click No).
10. Scroll down to the Other Devices section. Remove all devices with
Linksys, EtherFast, or PCMPC100 in the name. (If Other Devices is not
listed, proceed to the next step.)
11. When you’re finished, click on the Close button, shut down Windows, and
restart your computer.
12. After your computer has restarted, turn to the section called Windows 95
Installation and Setup or Windows 98 Installation and Setup, whichever is
appropriate for your computer. Follow the setup instructions.
48 4