Linksys PCMPC100 v3 - Manual (Page 11)

EtherFast ® 10/100 PC Cards
2. While the Update Device Driver Wizard window is visible, put the
EtherFast 10/100 PC Card Driver Disk into the floppy drive and click the
Next button. A window will appear and ask What do you want Windows to
do?
3. Select Search for the best driver for your device (Recommended). Click the
Next button.
4. A window will appear asking where you would like Windows 98 to search
for the driver. Select "Specify a location" and enter A:\Win98 into the drop-
down box. Click Next to continue.
17
Instant EtherFast ® Series
Windows 98 Installation and Setup
After installing the EtherFast 10/100 PC Card hardware in your computer, fol-
low these instructions to install the EtherFast 10/100 PC Card's Windows 98
network driver from the card's driver disk.
Please keep in mind that the installation procedure for the network driver will
vary slightly depending on the version of Windows 98 you are using and your
current system configuration.
To install the network driver, Start up your computer.
1. The Add New Hardware Wizard window will appear. Click the Next button.
If Windows 98 goes directly to the windows desktop and does not display
this window, refer to the Troubleshooting section.
16
Overview
N No otte e:: Screen shots used in this Installation and Setup section are
from installation of the standard EtherFast 10/100 PC Card
(PCMPC100 v3). If you are installing the EtherFast 10/100
Integrated PC Card (PCM100 v2), the installation process will be
unchanged, however, the product name will be different.
Installing the PC Card’s Driver