Listen Technologies Stationary LA-350 - Manual (Page 146)

140
LA-140
LT-82
Design GuideD
es
ign
G
uid
e
Supplementary
Frequently Asked Questions
Q
,ZDQWWRRFFDVLRQDOO\WXUQRIIRQHRUPRUHFKDQQHOVLQDPXOWLFKDQQHOV\VWHPEXW,GRQ·WZDQWWRKDYH
to rewire the system every time I do this. Is this possible?
A
Yes. The transmitter should be placed on channel “--”. This does not add a channel to the
system in your daisy-chain, however allows other channels to pass through. See page 40
for more information.
)UHTXHQWO\$VNHG4XHVWLRQV
Q
Can I make my receiver change channels automatically if I enter a room with a signal present on a
different channel?
A
squelches or the select button is pressed, the unit will automatically search for an active
channel. Refer to page 102 for more information about Auto-Seek Mode.
Q
How do I check the battery level on my receivers?
A
When the unit is on, press the power button momentarily. The LEDs will display the battery
VWDWXVIRUWKUHHVHFRQGV/('VHWF6HHSDJHIRUPRUHLQIRUPDWLRQ
Q
How do I adjust the squelch setting on my receiver?
A
See page 106 for detailed instructions on adjusting the squelch setting.
Q
How can I tell if the receiver has been fully charged when using the LA-350?
A
The green LED to the side of charging pocket will illuminate.
Q
Can I use rechargeable batteries in the alkaline battery compartment?
A
No. You must purchase a Listen LA-364 NiMH battery pack if you want to use a charging case.
Q
0\UHFKDUJHDEOHEDWWHULHVGRQ·WODVWYHU\ORQJ:K\"
A
If your batteries have been through many charging cycles they may need to be replaced.