Lantronix UDS1100 - Manual (Page 34)

4: Configuration Using Web-Manager
UDS1100 User Guide 34
Connection Settings - UDP
To configure a channel’s UDP settings:
1. On the main menu, click Connection. The Connection Settings window for the
selected channel displays.
2. In the available fields, enter or modify the following information:
Figure 4-8. UDP Connection Settings
Connect Protocol
Protocol Select UDP from the drop-down menu.
Datagram Mode
Datagram Type Configures the remote IP or network broadcast address and
the remote port. Enter 01 for directed or broadcast UDP. The
default setting is 00.
Accept Incoming Select Yes to accept incoming UDP datagrams. The default
setting is Yes.