Lantronix UDS1100 - Manual (Page 29)

4: Configuration Using Web-Manager
UDS1100 User Guide 29
Figure 4-6. Channel Serial Settings
2. In the available fields, enter the following information:
Channel 1
Disable Serial Port When selected, disables communication through the serial
port. The serial port is enabled by default.
Note: This feature is not available on single port device
servers.
Port Settings
Protocol From the drop-down menu, select the protocol type for the
selected channel. The default setting is RS232.
Flow Control Flow control manages data flow between devices in a network
to ensure it is processed efficiently. Too much data arriving
before a device is prepared to manage it causes lost or
retransmitted data. None is the default.
Baud Rate The unit and attached serial device, such as a modem, must
agree on a speed or baud rate to use for the serial connection.
Valid baud rates are 300, 600, 1200, 2400, 4800, 9600
(default), 19200, 38400, 57600, 115200, and 230400 baud.
The default setting is 9600.
Data Bits Indicates the number of bits in a transmitted data package.
The default setting is 8.
Parity Checks for the parity bit. The default setting is None.
Stop Bits The stop bit follows the data and parity bits in serial
communication. It indicates the end of transmission. The