LSI MegaRAID Express 500 User Manual
Page 105
Chapter 7 Cluster Installation and Configuration
91
Next.
6
The next dialog box configures the private network. Make sure that the network name
and IP address correspond to the network interface used for the private network.
Check the box Enable this network for cluster use.
Select the option Internal cluster communications only, then click on Next.
7
In this example, both networks are configured so that both can be used for internal
cluster communication. The next dialog window offers an option to modify the order in
which the networks are used. Because Private Cluster Connection represents a direct
connection between nodes, it remains at the top of the list.
In normal operation, this connection is used for cluster communication. In case of the
Private Cluster Connection failure, Cluster Service automatically switches to the next