LSI MegaRAID Express 500 - Manual (Page 100)

MegaRAID Express 500 Hardware Guide 86
Cluster Service Software Installation
Before you begin the Cluster Service Software installation on the first node, make sure
that all other nodes are either powered down or stopped and that all shared storage
devices are powered on.
Cluster Configuration Wizard To create the cluster, you must provide the cluster information. The
Cluster Configuration Wizard will allow you to input this information.
Step Description
1 Click on Start.
2 Click on Settings, then click on Control Panel.
3 Double-click on Add/Remove Programs.
4 Double-click on Add/Remove Windows Components. The following window displays.
5 Select Cluster Service, then click on Next.
6 Cluster Service files are located on the Windows 2000 Advanced Server or Windows
2000 Datacenter Server CD-ROM.
Enter x:\i386 (where x is the drive letter of your CD-ROM). If you installed Windows
2000 from a network, enter the appropriate network path instead. (If the Windows 2000
Setup flashscreen displays, close it.)
7 Click on OK. The following screen displays.