Kenwood DNX7360BTM - Manual (Page 85)

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English 85
Next page 3 Next page 3
2 Set the speaker locations
[Front Speaker] Sets the location of the
front speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the
rear speaker.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Minivan
(Long))
Car Type Adjust
You can manually set the sound output
timing of each channel.
1 Display the Car Type Adjust screen
2 Select a speaker you wish to adjust
2 2 2
1 1 1
3 3 3
4 4 4
1 Center speaker (DDX8 series)
2 Front speaker
3 Rear speaker
4 Subwoofer
3 Set a delay time
Make fine adjustment of the delay time
of the speaker output specified at the Car Type> to have a more suitable
environment for your vehicle.
The settings of the delay time
are automatically identified and
compensated by specifying the distances
of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and
the height of the reference point to
the position of the ears of the person
sitting in the front seat, and set the
right and left positions to the center of
the vehicle interior.
2 Measure the distances from the
reference point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
50cm
80cm
150cm
+70cm
+0cm
+100cm