Kenwood DNX7360BTM - Manual (Page 54)

54 DNX series DNX7360BT/ DNX7360BTM
Hands Free Unit Control
6 Make a call
■ If there are more than one phone
numbers registered under the same
name, go to step 7.
7 Select a Phone number category
Selects the Phone number category.
8 Make a call
⁄
• A message is displayed if the voice is not
recognized. Read the message for the further
operation.
Controlling Tone-based Services Controlling Tone-based Services
Uses tone base service using DTMF (Dual
Tone Multi Frequency).
1 Display the Talking screen
See Number> (page 52).
2 Display the DTMF input screen
3 You can send tones during a call