Kenwood DNX7360BTM - Manual (Page 105)

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English 105
"Authorization Error" :
Connection to the iPod has failed.
➡ Remove the iPod and then reconnect it.
The unit does not support the iPod.
➡ Refer to
connected to this unit> (page 7).
"Update your iPod" :
The iPod's software is an older version which
the unit can not support.
➡ Confirm that the software for the iPod is the
latest version. Refer to can be connected to this unit> (page 7).
"You only can connect one iPod." :
More than one iPod are connected to this unit.
➡ Connect only one iPod to the USB terminal
with iPod tag.
"Update your USB database" :
The USB device is different from the previous
one or the contained audio files are replaced.
➡ Update your database. Refer to
Control Screen> (page 26) of USB Device
Control.
"Navigation Error. Please turn on power
again later." (DNX series only) :
The communication error has occurred due to
severely cold temperature.
➡ Turn on power again after warming your car
interior.
"No Navigation" (DDX series only) :
This unit does not support the connected
navigation unit.
➡ The latest information on the connectable
navigation unit can be obtained from
http://www.kenwood.com/cs/ce.
No navigation unit is connected.
➡ Connect a supported navigation unit.