Kenwood TH-K2E - Manual (Page 96)

82
OPERATOR CONVENIENCES
APO (A
UTO
P
OWER
OFF)
The transceiver switches OFF automatically if no keys
or controls are pressed or adjusted for 30 minutes
(default). One minute before the transceiver switches
OFF, warning beeps sound for a few seconds and
“APO” blinks.
You can select the APO time from OFF (disable), 30
(default), 60, 90, 120, or 180 minutes.
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 17
(APO).
3 Press [MENU].
4 Turn the Tuning control to select the APO time from
OFF, 30, 60, 90, 120 or 180 minutes.
5 Press [MENU] to store the setting. Otherwise, press
[PTT] to cancel.
Note:
◆ APO does not function while the transceiver is scanning.
◆ The APO timer starts counting down the time when no key
presses, no control adjustments, and no PC control command
(SP/MIC jack) sequences are detected.
◆ The APO warning beep sounds and “APO” appears 1 minute
before the transceiver turns OFF.
◆ The APO warning beep sounds even if Menu No. 27 (BP)
{page 85} is set to “OFF”.